curl_init

[edit] Last updated: Fri, 17 May 2013

curl_getinfo

(PHP 4 >= 4.0.4, PHP 5)

curl_getinfo — Lit les informations détaillant un transfert cURL

Description

mixed curl_getinfo ( resource $ch [, int $opt = 0 ] )

curl_getinfo() lit les informations concernant le transfert ch.

Liste de paramètres

ch

Un gestionnaire cURL retourné par la fonction curl_init().

opt

Ce paramètre peut prendre l'une des valeurs suivantes :

CURLINFO_EFFECTIVE_URL : dernière URL réelle
CURLINFO_HTTP_CODE : dernier code HTTP reçu
CURLINFO_FILETIME : date distante du document, et -1 si la date du document distant est inconnue.
CURLINFO_TOTAL_TIME : durée de la transaction en secondes pour le dernier transfert
CURLINFO_NAMELOOKUP_TIME : durée de résolution du nom de domaine en secondes
CURLINFO_CONNECT_TIME : durée d'établissement de la connexion en secondes
CURLINFO_PRETRANSFER_TIME : durée en secondes, entre le début de la transaction et de début du transfert de fichiers
CURLINFO_STARTTRANSFER_TIME : durée en secondes jusqu'à ce que le premier octet soit sur le point d'être transféré
CURLINFO_REDIRECT_COUNT : Nombre de redirections
CURLINFO_REDIRECT_TIME : durée en secondes de toutes les étapes de redirection avant que la transaction finale ne soit débutée
CURLINFO_SIZE_UPLOAD : nombre total d'octets envoyés
CURLINFO_SIZE_DOWNLOAD : nombre total d'octets téléchargés
CURLINFO_SPEED_DOWNLOAD : vitesse moyenne de téléchargement
CURLINFO_SPEED_UPLOAD : vitesse moyenne d'envoi
CURLINFO_HEADER_SIZE : taille des en-têtes reçus
CURLINFO_HEADER_OUT : la chaîne de requête envoyée. Pour que cela fonctionne, appelez curl_setopt() avec l'option CURLINFO_HEADER_OUT.
CURLINFO_REQUEST_SIZE : taille totale des requêtes envoyées. Actuellement, uniquement pour les requêtes HTTP
CURLINFO_SSL_VERIFYRESULT : résultat de la vérification de la certification SSL demandée par CURLOPT_SSL_VERIFYPEER
CURLINFO_CONTENT_LENGTH_DOWNLOAD : taille du corps du téléchargement, lu dans l'en-tête Content-Length:
CURLINFO_CONTENT_LENGTH_UPLOAD : taille spécifiée de l'envoi.
CURLINFO_CONTENT_TYPE : Content-Type: du document demandé. NULL indique que le serveur n'a pas envoyé d'en-tête Content-Type:

Valeurs de retour

Si opt est fourni, la valeur retournée sera une chaîne. Sinon, ce sera un tableau associatif contenant les éléments suivants (qui correspond à opt), ou FALSE si une erreur survient :

"url"
"content_type"
"http_code"
"header_size"
"request_size"
"filetime"
"ssl_verify_result"
"redirect_count"
"total_time"
"namelookup_time"
"connect_time"
"pretransfer_time"
"size_upload"
"size_download"
"speed_download"
"speed_upload"
"download_content_length"
"upload_content_length"
"starttransfer_time"
"redirect_time"
"certinfo"
"request_header" (Existe seulement si CURLINFO_HEADER_OUT est utilisé via un appel à curl_setopt())

Historique

Version	Description
5.1.3	Ajout de `CURLINFO_HEADER_OUT`.

Exemples

Exemple #1 Exemple avec curl_getinfo()


<?php
// Création d'un gestionnaire curl
$ch = curl_init('http://www.yahoo.com/');

// Exécution
curl_exec($ch);

// Vérification si une erreur est survenue
if(!curl_errno($ch))
{
 $info = curl_getinfo($ch);

 echo 'La requête a mis ' . $info['total_time'] . ' secondes à être envoyée à ' . $info['url'];
}

// Fermeture du gestionnaire
curl_close($ch);
?>

Notes

Note:
Les informations founies par cette fonction sont conservées si la connexion est réutilisée. La donnée précédemment utilisée est donc retournée à moins que celle-ci ne soit écrasée en interne entre temps.

curl_init

curl_file_create

[edit] Last updated: Fri, 17 May 2013

add a note User Contributed Notes curl_getinfo - [9 notes]

down

ssttoo at hotmail dot com ¶

9 years ago


Here are the response codes ready for pasting in an ini-style file. Can be used to provide more descriptive message, corresponding to 'http_code' index of the arrray returned by curl_getinfo(). 

These are taken from the W3 consortium HTTP/1.1: Status Code Definitions, found at

http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html



[Informational 1xx]

100="Continue"

101="Switching Protocols"



[Successful 2xx]

200="OK"

201="Created"

202="Accepted"

203="Non-Authoritative Information"

204="No Content"

205="Reset Content"

206="Partial Content"



[Redirection 3xx]

300="Multiple Choices"

301="Moved Permanently"

302="Found"

303="See Other"

304="Not Modified"

305="Use Proxy"

306="(Unused)"

307="Temporary Redirect"



[Client Error 4xx]

400="Bad Request"

401="Unauthorized"

402="Payment Required"

403="Forbidden"

404="Not Found"

405="Method Not Allowed"

406="Not Acceptable"

407="Proxy Authentication Required"

408="Request Timeout"

409="Conflict"

410="Gone"

411="Length Required"

412="Precondition Failed"

413="Request Entity Too Large"

414="Request-URI Too Long"

415="Unsupported Media Type"

416="Requested Range Not Satisfiable"

417="Expectation Failed"



[Server Error 5xx]

500="Internal Server Error"

501="Not Implemented"

502="Bad Gateway"

503="Service Unavailable"

504="Gateway Timeout"

505="HTTP Version Not Supported"



And an example usage:

<?php

$ch = curl_init(); // create cURL handle (ch)

if (!$ch) {

    die("Couldn't initialize a cURL handle");

}

// set some cURL options

$ret = curl_setopt($ch, CURLOPT_URL,            "http://mail.yahoo.com");

$ret = curl_setopt($ch, CURLOPT_HEADER,         1);

$ret = curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1);

$ret = curl_setopt($ch, CURLOPT_RETURNTRANSFER, 0);

$ret = curl_setopt($ch, CURLOPT_TIMEOUT,        30);



// execute

$ret = curl_exec($ch);



if (empty($ret)) {

    // some kind of an error happened

    die(curl_error($ch));

    curl_close($ch); // close cURL handler

} else {

    $info = curl_getinfo($ch);

    curl_close($ch); // close cURL handler



    if (empty($info['http_code'])) {

            die("No HTTP code was returned"); 

    } else {

        // load the HTTP codes

        $http_codes = parse_ini_file("path/to/the/ini/file/I/pasted/above");

        

        // echo results

        echo "The server responded: <br />";

        echo $info['http_code'] . " " . $http_codes[$info['http_code']];

    }



}

?>

down

nemetral ¶

4 years ago


Just a quick note: if you want to use curl_getinfo() with option CURLINFO_HEADER_OUT in order to debug your cURL request, you must add curl_setopt($handle, CURLINFO_HEADER_OUT, true); first while specifying the options.

down

Mark Evers ¶

5 years ago


There is a constant missing from that list.  CURLINFO_REDIRECT_COUNT will give you the number of redirects it went through if CURLOPT_FOLLOWLOCATION was set.

down

luiheidsgoeroe at hotmail dot com ¶

5 years ago


Keep in mind that for CURLOPT_RETURNTRANSFER it has to be set with curl_setopt() before execution:



This doesn't work:

<?php

$ch = curl_init();

curl_setopt($ch, CURLOPT_URL, "http://www.example.com/");

curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);

curl_exec($ch);

var_dump(curl_getinfo($ch,CURLINFO_HEADER_OUT));

?>



This works:

<?php

$ch = curl_init();

curl_setopt($ch, CURLOPT_URL, "http://www.example.com/");

curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);

curl_setopt($ch, CURLINFO_HEADER_OUT, true);

curl_exec($ch);

var_dump(curl_getinfo($ch,CURLINFO_HEADER_OUT));

?>

down

-1

vince ¶

2 years ago


CURLINFO_HTTP_CODE does not return a string, as the docs say, but rather an integer.



<?php

    $c = curl_init('http://www.example.com/');

    if(curl_getinfo($c, CURLINFO_HTTP_CODE) === '200') echo "CURLINFO_HTTP_CODE returns a string.";

    if(curl_getinfo($c, CURLINFO_HTTP_CODE) === 200) echo "CURLINFO_HTTP_CODE returns an integer.";

    curl_close($c);

?>



returns



"CURLINFO_HTTP_CODE returns an integer."

down

-1

Anonymous ¶

2 years ago


The main doc neglects to mention that when the CURLINFO_HEADER_OUT option is set the array returned by this function will included a new property, request_header, that is a string of the headers sent in the request.

down

-1

nikita dot bulatenko at gmail dot com ¶

2 months ago


CURLINFO_SSL_VERIFYRESULT error codes:

0: ok the operation was successful. 

2 : unable to get issuer certificate

3: unable to get certificate CRL

4: unable to decrypt certificate's signature

5: unable to decrypt CRL's signature

6: unable to decode issuer public key

7: certificate signature failure

8: CRL signature failure

9: certificate is not yet valid

10: certificate has expired

11: CRL is not yet valid

12:CRL has expired

13: format error in certificate's notBefore field

14: format error in certificate's notAfter field

15: format error in CRL's lastUpdate field

16: format error in CRL's nextUpdate field

17: out of memory

18: self signed certificate

19: self signed certificate in certificate chain

20: unable to get local issuer certificate

21:unable to verify the first certificate

22: certificate chain too long

23: certificate revoked

24: invalid CA certificate

25: path length constraint exceeded

26: unsupported certificate purpose

27: certificate not trusted

28: certificate rejected

29: subject issuer mismatch

30: authority and subject key identifier mismatch

31: authority and issuer serial number mismatch

32: key usage does not include certificate signing

50: application verification failure

details at http://www.openssl.org/docs/apps/verify.html#VERIFY_OPERATION

down

-1

master-No-sp-aM at io dot ua ¶

4 years ago


CURLINFO_CONTENT_LENGTH_DOWNLOAD contains zero in FTP request although Content-Length field is present.



Following workaround may helps:



<?php

$ch = curl_init($url);

... CURL OPTIONS ...

$result=curl_exec($ch);

$pu=parse_url($url);

if($pu['scheme']=='ftp'){

    $regexp="/Content-Length: (\d*)/";

    preg_match($regexp,$result,$matches);

    $con_len=$matches[1];

}

else $con_len = curl_getinfo($ch, CURLINFO_CONTENT_LENGTH_DOWNLOAD);

?>



Its worth to keep using CURLINFO_CONTENT_LENGTH_DOWNLOAD in http requests, becouse there could be several headers pack if CURLOPT_FOLLOWLOCATION is fired, and regular expression for this case is a little bit complicated.

down

-2

raghuveer at spiderace dot com ¶

4 years ago


A code snippet that I had attempted to enumerate the Remote File Size and to post Amount of Time taken for that particular Curl Request.



<?php



/* borrowed the Byte Conversion code (byte_convert function) posted by "olafurw at gmail.com" and modified by "d.abromeit" in http://in.php.net/filesize. I did make changes in the notation of expression of multiples of bytes from KiB => KB, MiB => MB etc all symbols in this Byte Code*/



  function byte_convert($bytes)

  {

    $symbol = array('B', 'KB', 'MB', 'GB', 'TB', 'PB', 'EB', 'ZB', 'YB');



    $exp = 0;

    $converted_value = 0;

    if( $bytes > 0 )

    {

      $exp = floor( log($bytes)/log(1024) );

      $converted_value = ( $bytes/pow(1024,floor($exp)) );

    }



    return sprintf( '%.2f '.$symbol[$exp], $converted_value );

  }



   $userAgent = 'Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)';

   $url = 'http://www.spiderace.com/samplefiles/testfile.zip';



    // initialize curl with given url

    $ch = curl_init($url);

    // make sure we get the header

    curl_setopt($ch, CURLOPT_HEADER, 1);

    // make it a http HEAD request

    curl_setopt($ch, CURLOPT_NOBODY, 1);

    // add useragent

    curl_setopt($ch, CURLOPT_USERAGENT, $userAgent);

    //Tell curl to write the response to a variable

    curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);

    // The maximum number of seconds to allow cURL functions to execute. 

    curl_setopt($ch,CURLOPT_CONNECTTIMEOUT,60);

    // Tell curl to stop when it encounters an error 

    curl_setopt($ch, CURLOPT_FAILONERROR, 1);

    

    $execute = curl_exec($ch);

    

    // Check if any error occured

    if(!curl_errno($ch))

    {

        $bytes = curl_getinfo($ch, CURLINFO_CONTENT_LENGTH_DOWNLOAD);

        // Display the File Size

        echo byte_convert($bytes);

        echo "<br><br>";

        $total_time = curl_getinfo($ch, CURLINFO_TOTAL_TIME);

        echo 'Took ' . $total_time . ' seconds to send a request to ' . $url;

        clearstatcache();

    }

    curl_close($ch);



?>



NOTE: This code worked on Both Linux (tried on CentOS) & Windows Servers (tried on XAMPP For Windows on Windows XP PC), thank you. Hope this will be helpful to others as well.

add a note